RKI Beacon 110 72-2110RK-01 Single Channel Wall Mount Controller, 0 to 100% LEL, 0 to 25% O2, 0 to 100 ppm H2S, 0 to 300 ppm CO

RKI Wall Mount Controller, Single Channel, Series: Beacon 110, LEL, O2, H2S, CO, Detection Range: 0 to 100% LEL, 0 to 25% O2, 0 to 100 ppm H2S, 0 to 300 ppm CO, 2 x 8 Alphanumeric with Backlighting, NPT Conduit, 115/220 VAC Universal, 24 VDC Nominal, -20 to 50 deg C, 8-1/2 in H x 7 in W x 4.3 in D, Includes: Battery Charger

• Low cost versatile solution
• Compact, weatherproof, NEMA 4X enclosure
• 3 internal push buttons for setup, programming, and calibration, 1 external push button for alarm reset
• Long life sensors (2+ years typical)
• Accepts RKI LEL/O2/H2S/CO direct connect sensors
• Accepts any 4 to 20 mA transmitter
• Audible alarm with reset button
• Two programmable alarm levels
• Built-in trouble alarm with relay
• Relay rating 10 A, form C
• Provides 4 to 20 mA output

• Short Description - Beacon 110 controller,w/battery charging
• Warranty - 1 Year
• Item Name - Wall Mount Controller
• Type - Single Channel
• Series - Beacon 110
• Includes - Battery Charger
• Gas Type - LEL, O2, H2S, CO
• Detection Range - 0 to 100% LEL, 0 to 25% O2, 0 to 100 ppm H2S, 0 to 300 ppm CO
• Display Type - 2 x 8 Alphanumeric with Backlighting
• Temperature Rating - -20 to 50
• Dimensions - 8-1/2 in H x 7 in W x 4.3 in D
• Connection Type - NPT Conduit
• Marketing Description - The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry's best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level combustibles, oxygen, hydrogen sulphide, or carbon monoxide. The Beacon 110 can also accept any 4 to 20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller. The 10 A rated relays are strong enough to directly power external alarms and horns. The digital display has backlighting and simultaneous readout of the gas type and concentration. The Beacon 110 is also housed in a NEMA 4X rated case for a weather tight seal. This case design complies with lock out/tag out standards and can be fully secured. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 ships complete with a wall-mounting kit for easy installation. RKI offers the industry's widest selection of standard and toxic gas detection sensors, which can be utilized with the Beacon 110, providing gas monitoring protection for almost any application.
• Power Source - 115/220 VAC Universal, 24 VDC Nominal