RKI Wall Mount Controller, 4-Channel, Series: Beacon 410A, LEL, O2, CO2, Toxic Gas, Detection Range: 0 to 100% LEL, 0 to 25% O2, 0 to 1% CO2, 4 Line OLED, NPT Conduit, 115/220 VAC Universal, 24 VDC Nominal, -20 to 50 deg C, 12-1/2 in H x 11 in W x 6.4 in D, Includes: Large Red Strobe and Terminals
- Simultaneously control up to 4 gas monitoring channels
- Accepts any 4 to 20 mA transmitter, 2 or 3 wire
- Up to 3 programmable alarm levels per channel
- Up to 3 configurable alarm relays per channel
- 4 to 20 mA analog and modbus digital output standard
- Audible alarm with silence feature
- RFI/EMI-resistant
- Alarm reset switch
- Built-in trouble alarm with relay
- Weather and corrosion-resistant NEMA 4X enclosure
- LEL, O2, CO2 toxic direct connect sensors
- Short Description - Beacon 410A contoller with large red strobe and battery charging
- Warranty - 1 Year
- Item Name - Wall Mount Controller
- Type - 4-Channel
- Series - Beacon 410A
- Includes - Large Red Strobe and Terminals
- Gas Type - LEL, O2, CO2, Toxic Gas
- Detection Range - 0 to 100% LEL, 0 to 25% O2, 0 to 1% CO2
- Display Type - 4 Line OLED
- Temperature Rating - -20 to 50
- Dimensions - 12-1/2 in H x 11 in W x 6.4 in D
- Connection Type - NPT Conduit
- Marketing Description - The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy-to-use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4 to 20 mA transmitter. Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4 to 20 mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high and low peak readings for review at any time. A fully configurable, hi-vis strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option. All features and functions of the Beacon 410A are controlled by easy-to-use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.
- Power Source - 115/220 VAC Universal, 24 VDC Nominal
RKI_722104A14R_Specification_Sheet.pdf
RKI_722104A14R_Installation_Instructions.pdf
