RKI M2A 65-2645RK-05 Stand Alone Explosion Proof Sensor/Transmitter, Hydrogen Sulfide, 0 to 100 ppm

RKI Explosion Proof Sensor/Transmitter, Stand Alone, Series: M2A, Detects: Hydrogen Sulfide, 0 to 100 ppm Sensor, 1 ppm H2S Resolution, -40 to 40 deg C, Cast Aluminum, Epoxy Powder Coated, 8-1/2 in H x 5.2 in W x 4-1/2 in D, Includes: Junction Box, For Use With: Gas Monitors

• Operates with or without a controller
• Direct digital readout with OLED cold temperature display
• 4 to 20 mA and digital Modbus outputs standard
• 2 fully programmable alarm relays and fail relay
• Non-intrusive calibration via magnetic wand
• Explosion proof construction
• Patented water repellent sensor cover
• User friendly setup, push buttons and OLED menus
• Long life sensors (2+ years typical)

• Short Description - M2A sensor/transmitter w/j-box,0 - 100 ppm H2S,CSA version
• Warranty - 1 Year
• Item Name - Explosion Proof Sensor/Transmitter
• Type - Stand Alone
• Series - M2A
• Material - Cast Aluminum
• Includes - Junction Box
• Suitable For Use With - Gas Monitors
• Resolution - 1 ppm H2S
• Temperature Rating - -40 to 40
• Dimensions - 8-1/2 in H x 5.2 in W x 4-1/2 in D
• Detects - Hydrogen Sulfide
• Sensor Range - 0 to 100
• Finish - Epoxy Powder Coated
• Marketing Description - The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand alone monitor or as part of an integrated system. The M2A™ connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A™ provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging. The housing of the M2A™ does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics. The transmitter provides a 4 to 20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window. The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN. The M2A™ represents the latest leading edge technology in sensor/transmitters today.